 |
|
|
|
|
|
|
|
 What
makes a good scraper?
- One important factor is how the blade is attached to the handle.
If the blade is moving just slightly, this will make the scraper significantly
less effective. You need a scraper with a blade that does not flex.
Our scrapers have blades that are attached with a strong bolt on top
of a flat washer and a split washer preventing the blade from flexing.
- This thickness of the blade is also important. A thicker blade
will reduce the flex and transfer the power directly to the sharp edge,
making it much more effective. Our scraper
blades are at least twice the thickness of most other brands on
the market.
- A long handle means better leverage. Extra long handle will
increase the power, you can apply onto the painted or varnished surface.
These scrapers have 12” long handle allowing great leverage for scraping.
- The angle of the sharp edge is also important. You may have
noticed if you have ever used a chisel, that it was very sharp when
it was brand new but after it was sharpened it became significantly
less effective. This problem appears when you sharpen a scraper as well.
If you change the angle of the edge during sharpening, you will loose
some of the scrapers effectiveness. You must maintain the same angle.
Because our scraper blades are so much thicker it is easier to maintain
the correct angle. A sharpening guide or blade
sharpening jig of some sort can be very helpful to keep the correct
angle.
- A sharp blade is also very important. Allowing the scraper
to get very dull will result in great effort to bring the sharpness
back. It is simply much easier to sharpen a blade that is slightly dull
than extremely dull. Sharpen your scraper regularly.
How do you use these scrapers?
You need both hands with this hand tool. Position the scraper handle
parallel to the painted surface or closer. Grip one hand on the rear of
the scraper handle and apply pressure with your other hand close to the
blade. Holding the scraper with only one hand is not as effective.
Click to Enlarge Images Below
|
|
|
2 1/2" Stainless Steel Blade Scraper
2 1/2" stainless steel blade. Ergonomic design optimizes
leverage. Stainless steel blade
is reversible. Made in Sweden.
|
| |
|
# 661665
Price: $12.50
# 6616652P Save big on a 2-Pack.
Price: $17.00
|
|
|
|
 |
|
|
Triangular Scraper Professional
quality scraper with a long ergonomic handle. Length 12 5/8”. This
scraper has a thick blade (that gives you great leverage), a long
handle, and slightly curved sharp edges that reduce the risk of
gouging. Great for flat and other surfaces. Sharpen this on a water
cooled slow turning stone for best result. Avoid grinders for sharpening.
Three-edge scraper with one edge slightly convex. 12" handle. Blade
is 3" Extra blades are
available here. Complete with handle and blade. Blade made of laser
cut hardened Swedish steel.
|
| |
|
# 1200-3
Price: $28.00
# 1200-32P Save big on a 2-Pack.
Price: $39.50
|
|
|
|
 |
|
|
Contractors' Triangular Scraper Kit
Kit includes: Five Triangular scrapers. One five pack of
Triangular blades.
|
| |
|
# 1200-CT
Price: $169.00
|
|
|
|
|
|
|
Oval Scraper Oval scrapers
with two diameter size round tips for those classic grooved trim.
The blade has slightly curved sides for any flat or semi-flat surface.
Blade made from
hardened Swedish steel. Price includes long ergonomic handle.
|
| |
|
# 1200-70
Price: $42.00
# 1200-72P Save big on a 2-Pack.
Price: $63.00
|
|
|
|
 |
|
|
Compact Triangular Scraper
Three-edge scraper with one edge slightly convex. Hardened Swedish
steel blade.
This is a smaller version of our full size triangular scraper. 9"
handle is 9". Blade is 2/1/4"
|
| |
|
# 1200-5
Price: $24.00
# 1200-52P Save big on a 2-Pack.
Price: $39.00
|
|
|
|
 |
|
|
Profiled Scraper Professional
quality scraper with a long ergonomic handle. Length 12 5/8”. This
scraper has 6 different shapes in the same blade. Excellent for
various trim, contoured edges etc. You will find it very helpful
to have a variety of shapes in one blade when working on doors,
windows and trim. Sharpen this on a water cooled slow turning stone
for best result. Avoid grinders for sharpening. Extra blades
are available here. Complete with handle and blade. Blade made of
laser cut hardened Swedish steel.
|
| |
|
# 1200-4
Price: $46.00
# 1200-42P Save big on a 2-Pack.
Price: $74.00
|
|
|
|
 |
|
|
Boomerang Scraper Professional
quality scraper with a long ergonomic handle. Length 12 5/8”. This
scraper has two convex sides and one concave side. This is excellent
for rounded edges and posts. This shape is also very helpful when
working on shutters. The tips reaches into tight areas. Sharpen
this on a water cooled slow turning stone for best result. Avoid
grinders for sharpening. Extra blades
are available here. Complete with handle and blade. Blade made of
laser cut hardened Swedish steel.
|
| |
|
# 1200-21
Price: $46.00
# 1200-212P Save big on a 2-Pack.
Price: $75.00
|
|
|
|
 |
|
|
Clapboard Scraper This scraper
allows you to scrape the edge under the clapboard at the same time
you scrape the flat surface right below. You have a sharp point
on one corner of the blade. The edges are slightly curved to accommodate
uneven surfaces you may encounter on old clapboards. Tested by various
longtime painters with excellent feedback. Blade
made from hardened Swedish steel. Price includes long ergonomic
handle.
|
| |
|
# 1200-9
Price: $46.00
# 1200-92P Save big on a 2-Pack.
Price: $75.00
|
|
|
|
 |
|
|
Big Dawg If you have strong
arms and want to remove massive amounts of paint. The "Big Dawg"
parallelogram square scraper is the scraper for you! For removing
large volume of paint off of clapboard siding and other flat or
semi flat wood surfaces. Each side measures 3". Specially designed
for fitting the edge between clapboard that is slightly less than
90 degree's. The cutting edges are slightly curved on each side
for better effectiveness. The scraper blade
is made from hardened Swedish steel and has enough material for
you to create any custom shape you may need - simply grind the blade
into your custom shape after tracing the contour onto the blade.
Make sure you maintain approximately 45 degree angle on the sharp
edge. Price includes long ergonomic handle.
|
| |
|
# 1205
Price: $46.00
|
|
|
|
 |
|
|
Window Scraper Professional
quality scraper with a long ergonomic handle. Length 12 5/8". This
scraper has 4 different shapes in the same blade. Excellent for
windows, contoured edges etc. You will find it very helpful to have
a variety of shapes in one blade when working on your windows and
trim. Extra blades
are available. Complete with handle and blade. Blade made of laser
cut hardened Swedish steel.
|
| |
|
# 1200-12
Price: $34.00
|
|
|
|
 |
|
|
German Siding Scraper The blade
has a curved edge that is perfect for German siding. Professional
quality scraper with a long ergonomic handle. Length 12 5/8". This
scraper has 3 different shapes in the same blade. You will find
it helpful to have 3 shapes in one blade when working on German
siding. Extra blades
are available. Complete with handle and blade. Blade made of laser
cut hardened Swedish steel..
|
| |
|
# 1200-13
Price: $34.00
|
|
|
|
 |
|
|
2" Two-Handed Tungsten Carbide Scraper with
Reversible Blade This is an award winning scraper made
in Sweden by SANDVIK. You get great leverage with this ergonomic
handle. Slightly curved and reversible blade.
|
| |
|
# 1200-35
Price: $33.00
# 1200-22P Save big on a 2-Pack.
Price: $53.00
|
|
|
|
 |
|
|
2 " Flat Tungsten Carbide Scraper
2" welded Tungsten Carbide blade scraper.
|
| |
|
# 1200-30
Price: $42.00
|
|
|
|
 |
|
|
1 1/4" Flat Tungsten Carbide Scraper
Heavy duty steel handle with brazed on tungsten carbide blade.
|
| |
|
# 1200-25
Price: $37.00
|
|
|
|
 |
|
|
1/2" Flat Tungsten Carbide Scraper
Heavy duty steel handle with brazed on tungsten carbide blade.
|
| |
|
# 1200-31
Price: $33.00
|
|
|
|
 |
|
|
1/2" Fluted Column Tungsten Carbide
Scraper Heavy duty steel handle with brazed on tungsten
carbide blade. Curved edge. Convex height is 3/16"
|
| |
|
# 1200-28
Price: $31.00
|
|
|
|
 |
|
|
1 1/4" German Siding Tungsten Carbide
Scraper Heavy duty steel handle with brazed on tungsten
carbide blade. The blade has a curved edge that is perfect for German
siding. Convex height is 3/16"
|
| |
|
# 1200-27
Price: $37.00
|
|
|
|
 |
|
|
1" Crown Molding Tungsten Carbide Scraper
Heavy duty steel handle with brazed on tungsten carbide
blade. The blade has a raised crown edge. Convex height is 3/16"
|
| |
|
# 1200-26
Price: $40.00
|
|
|
|
 |
|
|
2" Tungsten Carbide Scraper with Vacuum Attachment
Stay clean while you scrape! Simply connect to your vacuum
cleaner and enjoy dust free scraping. Tungsten carbide blade. Attaches
to 1 1/4" hose. Use a reducer on a 2" vacuum hose.
|
| |
|
# 1200-VS
Price: $35.00
|
|
|
|
 |
|
|
1 1/4" Tungsten Carbide Cove Scraper
Heavy duty steel handle with brazed on tungsten carbide blade.
The blade has a raised crown edge. Convex height is 3/16"
|
| |
|
# 1200-24
Price: $42.00
|
|
|
|
 |
|
Falun
Red Paint
Scraper
Blades 
